Hydrant Flushing in the City of Katy
The Water Department will be flushing hydrants January 5th and 6th. The hydrant flushing will take place between 7AM and 4PM. The flushing may cause low water pressure as well as some discoloration of water, but this does not represent a health hazard. If you experience discolored water, run the cold water in all your faucets for approximately 5-10 minutes or open the outside faucet closest to your water meter for several minutes before using the water. However, customers are cautioned to determine if the water is clear before washing clothes as staining may occur.
If laundry becomes stained, do not put laundry in the dryer. Rewash clothes immediately using detergent and a rust remover. Most rust removers can also be used on stained fixtures. If water pressure or water volume seems to be low after hydrant flushing has been completed, check faucet screens (aerator) for trapped particles/sediment.
The City of Katy cannot be responsible for any damages incurred as a result of this activity. The flushing program is necessary to maintain a good water supply for both firefighting and domestic consumption which is a necessary and normal maintenance function of our water supply as required by the Department of Environmental Protection.
